Monday 29 October 2018

Cleaning Tips For Different Kind Of Tile Floors



There are many different type of tile floors, the most common ones are vinyl, ceramic and linoleum. Cleaning these kinds of tile floors is really quite easy, although different types of products are recommended of these kinds of floors. Therefore, before you begin cleaning - make sure you know which floors you are going to be working with.

 

Ceramic Tile floors

 

Ceramic tiles are completely man made and they are generally used as flooring because they are so versatile. They come in virtually all colors, shapes, sizes and thickness. There two major kinds of ceramic tiles; glazed and unglazed. Ceramic tile come installed with grout that also needs to be cleaned as well. The best way to clean glazed and unglazed ceramics are to use a cleaning solution made of:

 

 

-A gallon of warm water

 

-One tablespoon of borax

 

-Two tablespoons of ammonia

 

Use a microfiber mop as opposed to a sponge mop to clean the tiles because a sponge will push all the junk and dirt into the grout. The advantage of a microfiber mop is that it will pick up the dirt and clean it as you sweep across the flooring, minimizing the amount of junk you push into your grout tracks. When cleaning is sure to use circular cleaning motions with the mop across the tiles. This is best when cleaning tile floors. When you come across particularly dirty grout, try using a spray bottle to saturate the grout tracks and then mop over the wet area immediately. For grout that has stained and is not coming off, move onto a commercial tile cleaning products like OxiClean and dilute it to the specifications on the back of the label. Once you've finished - clean the floors with water and remove any residue of the cleaner.

 

Vinyl Floors

 

Similar to ceramic tiles, vinyl flooring is also offered in many different styles, shapes and patterns. Its regularly used and is highly versatile. It’s able to without scratching, stains and general wear and tear very well, and is an excellent alternative to ceramic flooring at a significantly reduced cost. Cleaning vinyl tiles are extremely simple. Again, we will use a cleaning solution made of:

 

 

-One gallon of warm water

 

-Half cup of ammonia

 

Be careful not to use any abrasive detergents or "mop and shine" products as they tend to leave a film on the flooring. Ammonia or a manufacturer recommended cleaning solution is the best bet when cleaning vinyl floors. Make sure to use a soft mop and apply the cleaning solution to the floor in a steady circular motion. Often the trouble occurs when trying to get rid of scuff marks. The best way to do this is to use baking soda or toothpaste and a soft sponge with water. If the scuff mark is still there, try using dish-washing soap and a stiff toothbrush.

 

Linoleum floors

 

Linoleum floors and vinyl floors are almost identical most people don't know the difference and can't tell the difference between the two. The only thing that's different is that vinyl is made from synthetic materials and linoleum is made from natural ingredients, mainly linseed oil and resins. Pigments are often added to the mixture and the linoleum is backed by a woven sheet underneath. It is very long last and is even more resistant to scratching that vinyl - and even when it does scratch it keeps its color as the patterns are generally embedded into the material itself, not stamped onto the top of the layer. 

 

 

Linoleum is generally polished and waxed for protection and this makes the job of cleaning it significantly easier. For heavy duty cleaning, you need to strip the wax from the flooring as per the manufacturer’s instructors. 

 

  • Fill a bottle with a 1 to 1 solution of vinegar and water and fill a large bucket with warm water.

     

  •  Directly spray your cleaning solution onto the linoleum and then use a damp microfiber cloth to wipe down the cleaner all over the surface. 

     

Even though linoleum is highly durable and resistant to damage, it is sensitive to excessive moisture. It’s best to use the water sparingly. When doing regular cleaning use a diluted all purpose surface cleaning agent and make sure to rinse well after use.

 

The best way to test if your flooring is linoleum or vinyl is to scrape off a small piece with a razor-blade in an unnoticeable area. If the color and design comes off then you have vinyl, otherwise you have linoleum.

 

With tile flooring, the best cure is prevention. Clean up all spills immediately and make sure to vacuum tile floors every few days. Spending a short amount of time cleaning tile floors can keep them in perfect, pristine condition and save you hundreds on commercial cleaning when it becomes too difficult to clean yourself. I hope you found my guide useful and good luck!

Tuesday 23 October 2018

Regrouting Kitchen Tile in 4 Easy Steps

Time for all time takes its fee on ceramic tile grout. Finally, stains and cracks begin to emerge and grout starts to drop off ceramic tiles. This gives them a disagreeable look that is harmful to your kitchen decoration. The situation can worsen when water penetrates under the tiles. This frequently leads to enlargement of mold and mildew, which can create a bad odor in your kitchen room. Hence, any symbols of wear are often a sign that it’s time for regrouting tile projects.

At first, it may appear like tile regrouting is a difficult undertaking. However, with a few willingly obtainable tools and the essential materials all that require doing to accomplish this job is to follow these steps: 



1. Select a grout color that fits healthy with the tiles. Smash off a small piece, and use it to contrast with the samples at your local house improvement store. Once you get the right section, you are good to go. Remember to calculate the space between the tiles earlier. You have to use sanded grout for tile spaces better than 1/8 inches. The sand is offer tensile strength to fill such large gaps.

2. Take away the worn-off grout using a grout saw while making certain that you take away all the existing grout flanked by the tiles. Clean the gaps using saleable Grout Cleaner to guarantee that no traces of mildew or other grime remain. After the grooves are perfectly worn-off grout an, dampen the spaces using a wet rag. 


3. Mix the grout according to the rule on the set. Then, employ a grout float to coat the mixture flush inside the groove. When you end filling the gaps, go over the whole regrout areas, pressing a little with your index finger. Use the grout float to even out any short spots detect with your finger, and then smoothen them once more.

When all the grooves are filled consistently, use a grout sponge to obtain rid of surplus grout on the tiles. If you mess up the work somewhat, do again the procedure once again. Wait for the grout to dehydrate then inspect the tiles. Some forms of grout tend to shrink during application. If you see this, simply level out the grooves using the float once additional 


4. The last procedure in regrouting tile projects is sealing. This serves to guard the new grout from mold and mildew. Grout sealant is obtainable from home improvement stores with a useful applicator. Simply apply it on the dry grout according to the simple instructions given. Finally, use a damp rag to clean the tiles surface to give them a sparkling look.

Friday 19 October 2018

Tile and Grout Cleaning - How to clean grout between tiles?

You mop and mop the tiles, but the floors still look dirty, wondering why?  The answer is quite obvious; it is because of the dirty grout lines.  The grout between the tiles can be tricky to get using regular mops or vacuum. 

 

Dirty grout lines can make your kitchen bathroom look grubby, old and mild.  Luckily, there are ways it is easy to clean those lines.

 

Now, if you have to clean the entire house and want it done perfectly in a short period or don’t have the energy to do it yourself, calling in the professionals for grout and tile cleaning is best.  However, for people who wish to do it yourselves, you will find household products which will prove very handy in this operation. 

 

Clean grout lines can make all the difference in the overall look of your home, especially the kitchen and the bathroom.

Сlеаnіng grоut bеtwееn tіlеs usіng bаkіng sоdа аnd vіnеgаr

  • Ѕtер 1: Маkе а раstе оf bаkіng sоdа аnd wаtеr- tаkе thrее раrts bаkіng sоdа tо one раrt wаtеr аnd mіх thоrоughlу tо fоrm а thісk раstе.  It is a versatile grout cleaning that works for stubborn to light grout on most tiles; it can be detrimental to natural stone tiles such as limestone or marble. 

    • Use your finger to apply the paste onto the grout lines.

    • Consider using rubber gloves to save your skin from abrasion or irritation, particularly those with extra sensitive skin

  • Step 2: Make white vinegar and water solution in a spray bottle- spray the vinegar solution you made after applying the baking soda paste.  Don't use vinegar if your tile is made of limestone, marble or other natural stones. 

     

  • Step 3: Wait until the solution stops bubbling-bubbling occurs due to the chemical reaction between vinegar and baking soda.  It lasts a few minutes and does the cleaning for you.  When the bubbling stops the chemical reaction cleaning period is also finished. 

     

     

  • Ѕtер 4: Таkе а brush tо sсrub thе grоut lіnеs- Usе а tооthbrush, оr nуlоn brіstlеd brush tо sсrub аlоng thе grоut lіnеs, dо nоt іgnоrе thе соrnеrs аnd еdgеs bесаusе these areas can have trapped residue. 

     

  • Step 5: Mop the tiles using plain water  

     

Once all of the scrubbings is done, take a mop and a few plain glasses of water to remove any residues of vinegar and baking soda.  Frequently rinse your mop and adjust the water when cleaning, this implies you do not spread the residue all over the ground.  

 

Cleaning the grout lines between tiles, a summary:

 

For non-natural stone tiles, the simplest way to clean grout lines is with a solution of 1 part White vinegar wіth one раrt wаtеr.  Маkе the sоlutіоn іn а sрrау bоttlе аnd usе іt оn thе grоut bеtwееn thе tіlеs. Wait until the bubbles settle down to scrub the grout using a toothbrush or a scrub brush.  When done, mop the tiles using water to take off any residue vinegar solution.

Monday 1 October 2018

How to Clean Tile Floor Grout?

Tile and Grout Cleaning Services Brisbane

No doubt in the fact that home maintenance is one of the hardest jobs to do. You will have lots and lots of work to do to keep your home clean and tidy. One of such important things to do to maintain your home clean is cleaning the tile floor grout.
This is no longer a hard job if you know the proper method of cleaning it. So here are a few tips and methods that can help to know about cleaning the tile floor grout

Sweep every day:
  1. One of the easiest ways to maintain your floor clean is to sweep the floor every day. No matter, how busy you are but try to sweep the home daily once at least. Try to sweep the place with the help of a microfiber dust mop. 
  2. Sweeping takes only a few minutes, but it works too well in maintaining your home in a clean and neat way. 
  3. It is better if you sweep the house right after you clean the dishes. If you start practicing it, then it will become your every day routine and so you will not feel hard to do this. At the same time managing your home in a clean manner.
Use a vacuum cleaner often:
  1. A vacuum cleaner is just not for cleaning the carpets; it can also be used to clean the bare floors. Cleaning with a vacuum cleaner helps you to remove even the tiny dust particles.
  2. Hence cleaning your floor tiles with the help of a vacuum cleaner will really help you to maintain the home in a clean and neat manner.
  3. To develop the habit of cleaning the entire home with the help of the vacuum cleaner at least once a week is necessary.
Tile Grout Cleaning Melbourne

Mopping the tiles:
  1. Try to mop the floor once in everyday. If you do not have enough time to mop the floor every day, you will have to mop at least two days once to maintain the cleanliness.
  2. Try to remove the dust particles and the wastes before you start mopping. Use a broomstick or a vacuum cleaner to remove all the dust particles on the floor. 
  3. Then start by mopping the entire place neatly. Mop portion by portion. 
  4. Before doing a wet mop try doing a wet mop. This will really help you to maintain your place in a very clean way.
Make use of mild chemicals:
  1. Do use any mild chemicals and cleaning solutions to clean the place. Do not use any sort of harsh and strong chemicals on the floor. 
  2. Using strong chemicals may damage the floor. Do test a small portion of the floor with the Deluxe Tile and Grout Cleaning solution and then start using it for the entire place. 
  3. Using bleaching powder to clean the floor is not advisable. 
  4. If there are any deep and strong stains on the floor, do not rub them harshly. Try to rub them smoothly with the help of a nylon brush. 
  5. Make use of a small amount of baking soda to remove the hard and strong stains from the floor.
If you find the place really worst, then it would be better if you hire a professional to clean the entire home once.
Tile and Grout Cleaning Brisbane

Thursday 13 September 2018

Tile and Grout Cleaning Will Keep Your Home Looking Beautiful


No issue how gorgeous tiles may look when they are fresh, they will inevitably become dirty over time. Though there are many cleaning solutions available for purchase, few will provide the brilliant and fresh results desired by a homeowner. Obviously it is important to maintain the cleanliness of the tiles but cleaning the grout is also exceptionally important. The grout is the light area that surrounds the tiles on the floors and walls.

Though tiled flooring is a beautiful addition to any house or office, through daily usage it will become discolored and will begin to look dirty. Overtime, the grime and dirt will increase and so a once beautiful floor will present as distasteful and therefore awkward.

Though many cleaning solutions are readily available, self-cleaning is time consuming and is an exclusive hassle. A professional company always has a lot of different cleaners and tools available, these tools will clean the tile and grout of a home much more successfully than those provided to customers.


The knowledge that a qualified grout and tile cleaning company provides is extremely valuable. A professional technician is qualified to clean beyond just surface stains and they also are able of selecting the accurate solution for any tile and/or grout that requires cleaning.

The cleaning process begins when an exact solution is applied and is then left for a desired amount of time so that it may absorb into the grout. Once the solution has had the time to work itself into the flooring a stream extraction machine is used to suck up the dust and grime, even deep under the surface.


At times it may be necessary to use a pressurized water spray as well to flash dirt out from the pores of the grout. This type of cleaning is very well-organized however it must be done by a skilled because it is important that the ideal amount of pressure is used so that the tile and grout will not be damaged.

Once the tiles and grout are clean a trained technician will seal the grout to help prevent future staining.

Hiring a trained grout and tile cleaning company will ensure that floors look as good as they did when they were first laid. A tile and grout cleaning company also provides other benefits including safe disposal of materials. In addition, a skilled technician is able to lower the risks of irritation to allergy sufferers and those with respiratory problems.

It is also important to note that tiles should be inspected and cleaned on a normal basis. Overtime the grout surrounding the tiles becomes discolored by the rust, grime, dirt, stains and soap scum that get caught in it. At times the dirt and grime will build up to such a level that cleaning it becomes impossible and replacing tiles is obviously very expensive.

Monday 20 August 2018

How to Clean tile grouts with bathroom cleaner?


Tile grout lines can be quite tough to clean. They usually tend to hold stuck up grime which gradually stains the whole floor. And, long before you know you are dealing with grubby, old looking tiles that can make cleaning a nightmare. This is especially true for your bathroom and kitchen. These two places are the most tiled spaces in your home and receive more heat, steam and general action than other rooms. Dirty tile grouts can lead to mold and mildew. So, cleaning in time can save you from the horrible ordeal of relentless scrubbing.

Among many ways to Floor Tile & Grout Cleaning, the easiest probably is using a toilet/bathroom cleaner. Here’s a step-wise guide:



Step 1: Choosing a toilet cleaner

You really have two options here- go natural or get a chemical  bathroom cleaner.

Getting a commercial bathroom cleaner- Look for a bathroom cleaner with sodium hydroxide. The most common chemicals used in toilet/bathroom cleaning products are sodium hydroxide and sodium hypochlorite. Both these chemical can be toxic in large amounts, so regulating their use is important. However, they are very effective in cleaning tile or porcelain surfaces along with the grout lines.

There are Toilet cleaners with bleach as well. Many people opt for these products to clean the grout. If you opt for bleach mixed cleaners, caution is important. Bleach can damage the tiling and be toxic to your health. Bleach can take off the water repellant materials of the grout. If you are considering using this kind of a cleaner, use rubber gloves, safety goggles and a respirator mask. Inhaling bleach fumes is bad for your respiratory tract. You might as well wear an old pair of cloth you don’t mind throwing out.


2. Eco-friendly toilet/bathroom cleaner- if you are against using harmful chemicals for cleaning, look for a plant-based natural bathroom cleaner. A cleaning product without sodium hydroxide and sodium hypochlorite might not be strong enough stubborn grout lines.

3. Spot test the cleaner before full use- Before cleaning the whole grout lines, test the cleaner you have chosen on a small inconspicuous spot. If the cleaner doesn’t damage the grout after leaving it o for five minutes, you are safe to go.

4. Pour the Tile & Grout cleaner- pour a small amount of the chosen cleaner on the grout lines furthest from the entrance/door so you can gradually clean in small sections towards the door.
 Do not use too much or too thick of a layer, use the cleaner evenly.
 Let the cleaner sit for 5-to 10 minutes or as per the instructions on the product label.



5. Scrub away- use a nylon-bristled scrub brush or a toothbrush to clean the grout lines once the cleaner has been allowed to sit on the lines for a few minutes. Do not scrub too hard with the brush, just gently take off the debris that the cleaner has collected for you.

6. Rinse and dry- This is a key step to maintaining your grout condition. Rinse off the bathroom cleaner as soon as you are done with scrubbing. Letting the cleaner sit for a while. Do not leave the cleaner after you are done scrubbing as the chemicals can damage the tiling and even leave a bad stain.